19 / 54
19 / 54
Sensors
EUROMAG | SENSORS | Ed. 04/2019
Maximum allowable deviation of the pipe flange faces is 0.5 mm.
L min
L max
L max. - L min. ≤ 0,5 mm
Fig. 30 Maximum allowable deviation
3.4.2 Sensor support
X
DO NOT USE the sensor as a support for the
pipe.
√
The pipe must be the support for the flowmeter.
Fig. 31 Incorrect installation
Fig. 32 Correct installation
3.4.3 Tightening torque
• Flanged sensors
Standard bolts must be lubricated well and tightened evenly around the gasket. If the bolts are over-
tightened, leakage or damage to the flowmeter or piping may occur.