11 / 54
11 / 54
Sensors
EUROMAG | SENSORS | Ed. 04/2019
3
INSTALLATION
3.1
STORAGE AND MOVING
3.1.1 Storage
To ensure the correct maintenance of the device while waiting for its installation, it is necessary
to comply with the storage provisions below:
1) Store the device in a dry place and protected from dust
2) Keep away from direct and continued sunlight
3) Keep the device in the original packaging until it is used
4) Temperature of the storage place: -40 ÷ +70 °C (-40 ÷ +158 °F)
3.1.2 Moving
CAUTION! The sensor must be carefully lifted and moved so as not to cause damage to the
sensor itself and connection flanges. Below you will find a description of correct and incorrect
lifting and moving.
The proper lifting method (for transport and installation) of the sensor is shown in Fig. 2.
The flowmeter must be lifted and transported by properly harnessing the device on the side parts of the
flowmeter, making sure that the slings (ropes, bands, etc.) are fixed to the appropriate eyebolts.
WARNING: Do not raise the flowmeter harnessing the converter (Fig. 3)!!
Do not move the flowmeter with the lifting device if it is not in the original packaging (Fig. 4) or
without adequate support that ensures the required stability.
Fig. 2
Fig. 3
Fig. 4