35
Description
Heater
1.
Main switch
2.
Blow out grid
3.
Connection for external
temperature sensor
4.
Display
5.
Suction grids (rear
side)
Remote control
A.
ON/OFF button
B.
Function selection button (MODE)
C.
Swing
D.
Higher temperature
E.
Lower temperature
Display:
a.
Temperature light
b.
Heating light (half capacity)
c.
Heating light (full capacity)
d.
WiFi light
e.
Function selection button (MODE)
f.
Oscillate/swing light
g.
Temperature and WiFi button
h.
Fan light
The remote control operates on a cell battery, type CR2025 (3V).
The heater must hang on a wall and must not be used lying down, leaning or
standing!
The heater should preferably be installed near or over an electric
connection point and should be connected permanently. Only a certified
electrician is allowed to carry out this connection and therefore it is not
Summary of Contents for Sani Wallheat 2000 Wifi
Page 2: ...2 ...
Page 102: ...102 ...
Page 103: ...103 ...
Page 104: ...104 EUROM Kokosstraat 20 8281 JC Genemuiden NL info eurom nl www eurom nl ...
