19
4.
Make sure the outdoor unit (Figure 7, pos. 1)
hangs level by tightening the nut (Figure 7,
pos. 2) on the adjustment bolt. Make sure the
bumper (Figure 7, pos. 3) is placed vertical.
Figure 7
Indoor unit installation
The indoor unit can be placed on a sturdy table or
it can be placed hanging on support brackets.
Support brackets (optional)
1.
Attach the support brackets (Figure 8, pos. 1)
to the outdoor unit brackets by tightening the
screw cap per bracket (Figure 8, pos. 2).
Figure 8
2.
Slide the indoor unit over the support
brackets (Figure 9, pos. 2).
3.
To remove the device, lift and slide it in the
opposite direction.
Figure 9
