2ad89664-e5f4-4907-bab1-9f7c76e7d9ef / DP10.0 / 2016-07-04
Page 20 of 43
Eurolyser Diagnostica GmbH
OPTIONAL EQUIPMENT
Printer, barcode scanner or PC
The following optional devices (not included in the standard delivery package) can be connected to the
Instrument:
An external printer
– for optional test result printouts
An external barcode scanner
A PC
– for the transfer of test data into a HIS or laboratory software
To install the printer (see “Technical specifications” section on page 40)
please connect the RS232 cable
to the RS232 socket at the Instrument
.
Connect optional equipment only when the Instrument is switched off. Please note
that attaching optional equipment (e.g. a printer) can increase the amount of
leakage current. All optional equipment must be connected before such leakage
current can be measured.
If the Instrument is not used according to the instruction manual, then the provided
levels of safety will be lowered.
Connecting a barcode scanner
To install the barcode reader (
see “Technical specifications” section on page 40) please connect the
RS232 cable to the RS232 socket at the Instrument (see illustration below). Always connect the power
supply to the barcode scanner correctly before using it.
If a printer should be installed simultaneously an adapter has to be interconnected (e.g. barcode-printer-
interface-cable, Eurolyser order number:
SZ0405
).
.
Eurolyser CUBE-S/CUBE Instrument Interfaces
Power supply
USB Socket
for connecting a
PC (for data transfer)
Tablet PC-Lock eyelet
Bluetooth on/off
switch
(left: Bluetooth OFF)
USB Port
for connecting a
Tablet PC
RS 232
socket for connecting a
printer, a barcode reader or a
PC (for data transfer)
