2ad89664-e5f4-4907-bab1-9f7c76e7d9ef / DP10.0 / 2016-07-04
Page 16 of 43
Eurolyser Diagnostica GmbH
CONFIGURING THE EUROLYSER CUBE-S/CUBE
You can configure your
Eurolyser CUBE-S/CUBE laboratory photometer
according to your needs before
using it. To access the configuration menu follow these steps:
1. Start-up menu
2. Settings menu
Tap
to open the Settings
menu.
Tap the setting you want to
configure. Swipe down to view all
available options.
All following descriptions are examples. The configuration of the Eurolyser CUBE-S/CUBE
Instrument models may vary depending on the tests used.
Note:
The normal values, units and sample types for a test can only be displayed if the
respective test RFID card has been placed on the Instrument and read.
Setting normal values and limits
1. Settings menu
2. Normal values/limits menu, e.g. CRP 2.1 Normal values/limits menu, e.g. PT
Tap
Normal Values
to open the
Normal Values / Limits menu.
To change a limit tap the value
and change it using the appearing
Tablet PC keyboard.
To change the test for which the
normal values are displayed tap
and select a test in the
appearing drop down menu*.
To change a limit tap the value
and change it using the appearing
Tablet PC keyboard.
To change the test for which the
normal values are displayed tap
and select a test in the
appearing drop down menu.
