USER MANUAL
9
The unit is sup plied with a power plug appropriate to its voltage and
destination. Should any other connections be required they must be
carried out with the following configuration.
DMX-512 connection between fixtures
The fixture is equipped with 2-pin XLR sockets for DM X input and output. The
sockets are wired in parallel. Only use a shielded twisted-pair cable designed for
3-pin XLR-plugs and connectors in order to connect the controller with the fixture
or one fixture with another.
Occupation of the XLR-connection
Caution:
At the laser fixtur e, the DMX-cab le has to terminated with a
terminator. Solder a 1 20 Ohm resistor bet ween Signal (-) and
Signal (+) into a 3-pin XL R-plug and pl ug and plu g it in the
DMX-output of the last fixture.
Cable(EU)
Cable(US)
Pin
International
Brown
Black
Live
L
Liht blue
White
Neutral
N
Yellow/Green
Green
Earth
