00096441.DOCX, Version 1.0
41/44
"Focus"
"Effect Fun"
"DMX Reset"
"DMX Lamp"
"PT Speed"
"Return"
Return to the main menu
"AssiTool"
"FacCofig "
★
Only service function
"Eprt"
"Save"
"DefCofig"
★
"Eprt"
"Redress "
"Pan"
0-255
"Tilt"
"StaticGB"
"Colour"
"Focus"
"Return "
▲
"ChanlDef"
"FacSett"
★
"Checksum"
"Return "
▲
Return to the main menu
"ChanlVal"
Chanl 00-Chanl 16
Display the DMX 512 value of
each channel
With this function, you can
display with which value the
respective channel is received.
"All Rst''
"Off"
Cancel
"On"
Reset function
With this function you can reset
the device via the Control Board.
"ExitMenu"
▲
Return to the home screen
CLEANING AND MAINTENANCE
The operator has to make sure that safety-relating and machine-technical installations are inspected by an
expert after every four years in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are inspected by a
skilled person once a year.
The following points have to be considered during the inspection:
1) All screws used for installing the devices or parts of the device have to be tightly connected and must not
be corroded.
2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension,
trussing).
3) Mechanically moved parts like axles, eyes and others must not show any traces of wearing (e.g. material
abrading or damages) and must not rotate with unbalances.
4) The electric power supply cables must not show any damages, material fatigue (e.g. porous cables) or
sediments. Further instructions depending on the installation spot and usage have to be adhered by a
skilled installer and any safety problems have to be removed.
