EuroLite NSF-300, User Manual

Page: 26 / 32

www.eurolite.de
26
DMX512 Operation
For operation with a controller with DMX512 protocol, the smoke machine is equipped with 8 control
channels. To be able to operate the machine with a DMX controller, the DMX starting address must be set
for the first DMX channel. For this, press the button
MENU so many times until „ Add “ is indicated in the
display. Then press ENTER to make your settings. Use the buttons ▲ and ▼ to set the address between
001 and 512 . Once again, press ENTER to confirm your settings. You may now start operating the machine
via your DMX controller. The section below describes all functions of the 8 control channels.
Channel 1 – Smoke output
DMX value Function
000 – 009 on
010 – 255 off
Channel 2 – Brightness red LEDs
DMX value Function
000 – 009 off
010 – 255 Dimmen von 1 – 100%
Channel 3 – Brightness green LEDs
DMX value Function
000 – 009 off
010 – 255 Dimming from 1 – 100%
Channel 4 – Brightness blue LEDs
DMX value Function
000 – 009 off
010 – 255 Dimming from 1 – 100%
Channel 5 – Brightness red, green and blue LEDs (color mixing)
DMX-Wert Funktion
000 – 009 off
010 – 255 Dimming from 1 – 100%
Channel 6 – Color change speed
DMX value Function
000 – 009 off
010 – 255
slow
→
fast
Channel 7 – Strobe control
DMX value Function
000 – 009 off
010 – 255
Strobe slow
→
fast
Channel 8 – Master control
DMX value Function
000 – 009 off
010 – 255 Dimming from 1 – 100%