www.eurolite.de
24
6
OPERATION
The built-in control panel on the rear of the machine features four operating buttons and a display which
shows all operation statuses of the machine. The control panel allows the user to customize the color of the
LEDs, the DMX starting address and the fluid sensor.
Switch the device on via the power switch. The display flashes and indicates ”
HEAT
“. At the same
time, the machine starts the warm-up process.
While the unit is warming up, fog output will not be possible yet. Program the necessary menu
settings with the control panel. Once the warm-up process is completed, fog output will be possible.
The display stopps flashing and the green LED on the remote control lights up continuously.
Press the green button on the remote control to emit smoke.
During operation smoke emission may stop. In this case the device is heating up again, and
will be ready to operate in approx. 1 to 2 minutes. This process guarantees an appropriate
vaporization temperature and the best smoke emission possible. The temperature is
regulated by a high-quality thermostat.
The output nozzle will heat up during operation. Therefore do not touch the nozzle until it has
cooled down completely.
