www.eurolite.de
27
Switching the Fluid Sensor on and off
To protect the pump, the machine uses a fluid sensor to thest if there is smoke fluid in the tube. If the sensor
detects not enough fluid in the tube, the machine will enter a protection mode after about 20 seconds and
shuts the pump down. The display will start flashing.
To set the sensor, press the button
MODE
until the display indicates „
oiL“
.Then press
ENTER
to make your
settings. Use the buttons ▲ and ▼ to deactivate the fluid sensor (indication “
off
”) and to reactivate it
(indication “
on
”). Once again, press
ENTER
to confirm your settings.
Note, however, that this sensor is a very important protection mechnism. For proper
operation, it should be activated.
