00062596.DOC, Version 1.0
15/19
Always fix the fixture with an appropriate safety-rope.
The maximum ambient temperature
T
a
= 45° C must never be exceeded.
Operate the device only after having familiarized with its functions. Do not permit operation by persons not
qualified for operating the device. Most damages are the result of unprofessional operation!
Never use solvents or aggressive detergents in order to clean the device! Rather use a soft and damp cloth.
Please use the original packaging if the device is to be transported. Make sure that you pack the device in
the original state.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
Never remove the serial barcode from the device as this would make the guarantee void.
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, lamp explosion, crash etc.
INSTALLATION
Installing/Replacing the lamp
DANGER TO LIFE!
Only install the lamp with the device switched off!
Unplug from mains before!
For the installation, you need one of the following lamps:
PHILIPS MSR 575/2 95V/575W GX-9,5 1000h
89107015
GE CSR575/2 SE 95V/575W GX-9,5 1000h
89107000
OMNILUX OSD 95V/575W GX-9,5 2000h 6000K
89107005
OMNILUX OSR 575/2 95V/575W GX-9,5 1000h
89107017
SYLVANIA BA575/2SE NHR 575W GX-9,5 8500K
89107020
OMNILUX OSD 95V/575W GX-9,5 1000h 7200K
89107205
OSRAM HSR 575/72 95V/575W GX-9,5 1000h
89107210
The lamp must only be changed when wearing appropriate protective clothing (protection glasses, protection
gloves, helmet with sight, leather apron).
The lamp has to be replaced when it is damaged
or deformed due to the heat!
CAUTION!
The lamp life given by the manufacturer must never be exceeded. This is why you need to take notes on the
operational time of the lamp and replace the lamp in time.
Keep exchanged lamp in a protective container and remove accordingly.
Before replacing the lamp, unplug mains lead and let the lamp cool down (approx. 10 minutes).
During the installation do not touch the glass-bulbs bare-handed! Please follow the lamp manufacturer's
notes!
