00131337, Version 1.0
31/36
Total hours
With this function, you can display the running time of the device since the last hours reset under
Advance /
time reset
.
Partial hours
With this function, you can display the temporary running time of the device since the last switch-on of the
device.
Show temperature
With this function, you can display the temperature in the projector-head.
DMX operation
Setting the DMX starting address
For operation with a controller with DMX512 protocol, the device is equipped with 25 control channels. To be
able to operate the device with a DMX controller, the DMX starting address must be set. The starting
address depends upon which DMX controller is being used. Please refer to the controller’s documentation.
1
Press the arrow button left or right to enter the mode menu. Press the OK button.
2
Select
Setting
with the arrow button up or down.
3
Press the OK button twice.
4
Use the arrow button up or down to select
Address
and press the
OK
button to confirm.
5
Use the arrow button up or down to set the DMX starting address. Confirm your setting by pressing the
OK button.
6
When DMX control signals are received, the DMX control indicator lights up.
Note: Please make sure that you do not have any overlapping channels in order to control each device
correctly and independently from any other fixture on the DMX chain. If several devices are addressed
similarly, they will work synchronically.
Summary of Contents for LED TMH-H90
Page 1: ......
