00079729.DOC, Version 1.0
19/27
Overview
(1)
Housing
(2)
Rubber foot
(3)
3-pin DMX input
(4)
3-pin DMX output
(5)
Safety bond hole
(6)
Microphone
(7)
Enter button
(8)
Mode button
(9)
Display
(10)
Down button
(11)
Up button
(12)
LED bar
(13)
Fuseholder
(14)
Power input
(15)
Power output
INSTALLATION
Rigging
The device can be placed directly on the stage floor or rigged in any orientation on a truss without altering its
operation characteristics.
Overhead rigging
DANGER TO LIFE!
Please consider the EN 60598-2-17and the respective national standards during the installation!
The installation must only be carried out by an authorized dealer!
The installation of the device has to be built and constructed in a way that it can hold 10 times the weight for
1 hour without any harming deformation.
The installation must always be secured with a secondary safety attachment, e.g. an appropriate catch net.
This secondary safety attachment must be constructed in a way that no part of the installation can fall down
if the main attachment fails.
When rigging, derigging or servicing the device staying in the area below the installation place, on bridges,
under high working places and other endangered areas is forbidden.
