EuroLite DMX Move Control 512 PRO, User Manual

Page: 62 / 68

Firmware Update
www.eurolite.de
62
12 12 12 12
FIRMWARE UPDATE
The internal software (firmware) of the controller can be updated. New versions of the firmware will include new features,
bug fixes and the optimization of current processes. We suggest to always operating the device with the latest firmware
to ensure the highest level of functionality. Check
www.eurolite.de from time to time for further information. The
installation procedures may vary slightly from those described in this user manual; please note the instructions that will
be included in the download package.
Follow the steps below to update the firmware:
1
Download the firmware from the internet www.eurolite.de download section of the product.
2
Create a folder “DMX MOVE CONTROLLER 512 PRO“on the root directory of a USB memory device.
3
Copy and extract the firmware to the folder on the USB memory device.
4
Connect the USB memory device with the new firmware to the controller’s USB port.
5
Turn off controller.
6
Keep pressing the three buttons REC, BLACKOUT and RUN MODE simultaneously.
7
Turn on the controller. After approx. 3 seconds, the display indicates “ PRESS ANY BUTTON TO UPDATE “.
8
Release the buttons REC, BLACKOUT and RUN MODE again.
9
Press any button to start the update procedure.
10
Turn the controller off and on again, as soon as the new firmware has been programmed. The update procedure is
complete and the USB memory device can be removed.