EuroLite DMX Move Control 512 PRO, User Manual

Page: 43 / 68

Operating Elements and Connections
www.eurolite.de
43
No. Element Function
1 Motorized faders For adjusting the DMX values of the connected light effect units. The
current DMX value is indicated in the display. The faders are split into 4
pages so that 4 x 8 DMX channels and both movement channels can be
controlled (i.e. up to 34 DMX channels per fixture).
2 FIXTURE buttons
To select and deselect up to 24 devices on three pages. The buttons light
to indicate which devices are selected.
3 PAGE button To switch the FIXTURE buttons (2) between the three fixture pages.
• LED A lights: page A is selected (fixtures 1-8).
• LED B lights: page B is selected (fixtures 9-16).
• LED C lights: page C is selected (fixtures 17-24).
4 PAN/TILT button • LED off: The PAN/TILT wheels control the pan/tilt channels
• LED on: The PAN/TILT wheels control the special features such as
movements.
5 PAGE UP/CLEAR button • To switch the faders (1) between the four pages. Each time the button is
pressed, the controller will advance one page. The LEDs above the
button indicate which page is selected.
• Keep this button pressed for 3 seconds to set all adjustments made
through the faders and encoder wheels to zero.
6 PAGE DOWN/HSV button • To switch the faders (1) between the four pages. Each time the button is
pressed, the controller will go back one page. The LEDs above the button
indicate which page is selected.
• Keep this button pressed for 3 seconds to activate the HSV function for
the faders 6 to 8. Then the RGB colors can be adjusted via HSV. The H
fader sets the hue, the S fader the saturation and the V fader the
brightness (value). The HSV function can be used for all fixtures for which
the RGB channels have been correctly assigned to the control elements
of the DMX MOVE PRO.
7 Master fader To adjust the brightness. This fader controls all dimmer channels and color
channels simultaneously.
8 Display
9 PAN encoder wheel • SPEED LED (4) off: To adjust the horizontal position.
• SPEED LED (4) on: To adjust special features such as movements.
10 TILT encoder wheel • SPEED LED (4) off: To adjust the vertical position.
• SPEED LED (4) on: To adjust special features such as movements.
11 REC/ENTER button In program mode, this button activates the store command. In system
setting mode, this button confirms adjustments.
12 MENU/ESC button • Long actuation: To call and exit the system settings.
• Short actuation: To abort a setting procedure and jumping back to a
higher menu level.
• For inserting a scene into a chase.
• To adjust the running speed for a chase in time-controlled mode (tap
function).
13 BLACKOUT/DEL button • Live mode: Turns off all fixtures or sets all control channels to the value
zero ( system settings).
• Program mode: For deleting scenes or chases keep this button pressed
and select the memory bank to be deleted with the number buttons (20).
14 RUN MODE/SWAP button • Live mode: For setting the running mode of a chase. A short actuation
switches between manual, sound-controlled and automatic mode. The
LEDs next to the button indicate the current setting.
-
MANUAL : The chase can be manually advanced step by step with the
pan wheel.
- MUSIC : The individual steps of the chase run to the rhythm of the music
picked up via the internal microphone.
- AUTO : The individual steps of the chase run at the adjusted speed and
fade time.
• FX mode: For switching between the parameters.
15 MOVEMENT button When this button is activated (LED lights), the number buttons (20) activate
movements or color effects.