00124275, Version 1.0
24/32
OPERATION
After you switch on the device with the power button the device starts running. The display lights up and you
can choose the desired mode via the buttons MENU, ENTER, UP and DOWN.
The device features a memory function. The last program selected will begin anew when the device is
restarted.
The device has two operating modes. It can be operated in stand-alone mode via the control board and the
EUROLITE IR-35 remote control or in DMX-controlled mode via a standard DMX controller and WDMX with
suitable wireless transmitter.
Stand-alone mode
In the stand-alone mode, you can do without a controller. De-activate WDMX
and call up the desired setting.
Please refer to the instructions under
Control Board
.
Master/slave operation
Several devices may be interconnected. Then all slave units can be synchronized and controlled with the
master unit without the need for a DMX controller.
The devices must be set to the corresponding operating
modes.
1
Set the master device to the mode (Master). Set the slave mode (Slave) on every slave device. Please
refer to the instructions under Control Board.
2
Activate WDMX. When the fixture is set as Master, the wireless DMX will switch to signal transmission
mode. When the fixture is set as Slave, the wireless DMX will switch to signal receiving mode.
Control Board
The Control Board offers several features: you can easily set the starting address, run the pre-programmed
program or select a DMX channel mode.
The main menu is accessed by pressing Menu. Browse through the menu by
pressing Up or Down. Press Enter in order to select the desired menu. You can
change the selection by pressing Up or Down. Press Enter in order to confirm.
You can leave every mode by pressing Menu. The functions provided are listed
in the following sections.
Default settings in bold
MAIN level
Menu level 2
Description
DMX Addr
001
-512
DMX address setting
DMX Chan
6CH
, 8CH, 12CH
Setting DMX channel mode
Dimmer
OFF
/Dim1/Dim2/
Dim3/Dim4
Dimmer speed (step response)
OFF:
Response characteristics of LEDs
Dim1:
Response characteristics of halogen lamps, fast
Dim2:
Response characteristics of halogen lamps, less fast
Dim3:
Response characteristics of halogen lamps, middle
Dim4:
Response characteristics of halogen lamps, slow
Mas/Slav
Master/
Slave
Master/Slave mode
Wireless
Power
–
ON
/OFF
ON: Activate WDMX
OFF: De-activate WDMX
Summary of Contents for Akku IP UP-4 Plus HCL Spot WDMX
Page 1: ......
