EuroLite Akku IP UP-4 Plus HCL Spot WDMX, User Manual

Page: 26 / 32

00124275, Version 1.0 26/32
Progr 7 Red Dark Progr 33 Yellow Dark
Progr 8 Red Green Progr 34 Yellow Cyan
Progr 9 Red Blue Progr 35 Yellow Magenta
Progr 10 Red Amber Progr 36 Yellow White
Progr 11 Red Yellow Progr 37 Cyan Dark
Progr 12 Red Cyan Progr 38 Cyan Magenta
Progr 13 Red Magenta Progr 39 Cyan White
Progr 14 Red White Progr 40 Magenta Dark
Progr 15 Green Dark Progr 41 Magenta White
Progr 16 Green Blue Progr 42 White Dark
Progr 17 Green Amber Progr 43 UV Dark
Progr 18 Green Yellow Progr 44 UV Red
Progr 19 Green Cyan Progr 45 UV Green
Progr 20 Green Magenta Progr 46 UV Blue
Progr 21 Green White Progr 47 UV Amber
Progr 22 Blue Dark Progr 48 UV Yellow
Progr 23 Blue Amber Progr 49 UV Cyan
Progr 24 Blue Yellow Progr 50 UV Magenta
Progr 25 Blue Cyan Progr 51 UV White
Progr 26 Blue Magenta
Jump/Fade
000 - 255
Jump (000 – 255)
Switching colors with increasing speed;
Fade (000 – 255)
Fading colors with increasing speed
White Bal
Red – 125 - 255
White balance
Default setting: RGBWA+UV = 125
Green – 125 - 255
Blue – 125 - 255
White – 125 - 255
Amber – 125 - 255
UV – 125 - 255
Sys Info
Temperat
xxC
Internal temperature of the device
Cur Power
xxx%
Remaining battery power in percent
Economy ON /OFF
Power-save mode
ON - power save mode, 50 % power
OFF - full power
Dis Perm ON/ OFF
Display shutoff
ON - display does not shut off
OFF- Shuts off the display after 30 seconds
Press any button for 3 seconds to release the lock.
Def.Set YES /NO Reset to factory settings
Wireless Setting
This device is prepared for wireless data transmission (WDMX) ex works. If you wish to de-activate WDMX
control, you can select the function
“Power” – “Off” . With the function “Power” – “On” you can log in the
wireless receiver to a wireless transmitter, the fixture could now receive the wireless DMX signal.
With the function
“Unlink” , you can log out the projector from the wireless sender.