00105033, Version 1.0
25/32
EUROLITE IR-20 remote control
The device must be activated for remote control. For this, set the device under menu item
IR
to
ON
and
press the ENTER button to confirm activation.
1
When actuating a button, always hold the remote control in the
direction of the sensor in the middle of the front of the device. There must be
visual connection between the remote control and the sensor.
2
The remote control is supplied with a battery inserted. An insulating
foil between the battery and the battery contacts prevents the battery from
being discharged during storage. Prior to the first operation remove the foil
from the battery support on the rear side
of
the
remote control. Otherwise operation of
the remote
control is not possible.
3
If the range of the remote control
decreases,
replace the battery. For this purpose, on the rear side of the remote control
press the small bar with the groove to the right and at the same time remove
the battery support. For operation, one 3 V button cell type CR2032 is
required. When inserting, pay attention that the positive pole of the button cell
shows upwards in the support.
CAUTION!
Danger of explosion when battery is replaced improperly. Only replace by the same type.
Please dispose of old and used batteries properly. Batteries are hazardous waste and should
not be disposed of with regular domestic waste!
Control via IR remote
The Controller has several buttons with following functions:
ON
OFF
▲
/ +
Switch through,
Upwards, increasing
▼
/ - Switch
through, downwards,
decreasing
AUTO
Color change
„Switching“;
via ▲▼ the speed
can be regulated
FADE
Color change
„Fading“;
via ▲▼ the speed can
be regulated
STROBE
Strobe effect of the
color set under MANU;
via ▲▼ the speed can
be regulated
SOUND
Color change
„Sound controlled“
COLOR
Color presets;
via ▲▼ the 16 preset
colors can be chosen
MASTER
Master setting
SLAVE
Slave setting
FULL
All colors on
R
ED
G
REEN
B
LUE
SHUT
Blackout –
LEDs off / LEDs on
W
HITE
A
MBER
UV
DMX starting
ADDR
ess;
via ▲▼ the DMX
address can be set
O
RANGE
C
YAN
P
INK
Setting DMX
CH
annel
mode; via
▲▼ the DMX channel
mode can be set
The device features a memory function. The last setting selected will begin anew when the device is
restarted.
Summary of Contents for 42110199
Page 1: ......
Page 31: ...00105033 Version 1 0 31 32...
