EuroLite 42109860, User Manual

Page: 33 / 40

00126630, Version 1.0 33/40
DMX operation
Setting the number of DMX channels and the DMX starting address
For operation with a controller with DMX512 protocol, the device is equipped with 20 control channels.
However, it can also be switched to a mode with 3, 4, 6, 8, 16 or 18 channels if different functions are
required. To be able to operate the device with a DMX controller, the DMX starting address must be set for
the first DMX channel. The starting address depends upon which DMX controller is being used. Please refer
to the controller’s documentation.
1 Press the button MENU so many times until dПH is indicated in the display. Confirm with the ENTER
button. The display indicates the DMX start address.
2 Confirm with ENTER . The display indicates 3CH (3 DMX channels), 4CH (4 DMX channels), 6CH (6
DMX channels), 8CH (8 DMX channels), 16CH (16 DMX channels), 18CH (18 DMX channels) or 20CH
(20 DMX channels). Use the UP and DOWN buttons to select the desired number of DMX channels.
3 Confirm with ENTER . Now the display indicates the menu item for the DMX start address d*** . Confirm
with ENTER , then use ▲ and ▼ to set the address.
4 Confirm
ENTER
. A dot will flash when DMX signals are being received. If no control signals are
available, the DMX address set will be flashing.
5 You can adjust the behavior in case of missing DMX signal in the system settings under the menu item
SYS > FAIL : HOLD = Most recent DMX value is held or BLAC = LEDs are switched off (default setting).
Note: Please make sure you do not have any overlapping channels in order to control each device correctly
and independently from any other fixture in the DMX chain. If several devices are addressed similarly, they
work synchronically.
Functions in DMX mode
3-channel mode
Channel Value Function
1
Master dimmer
000‒255 Total brightness 0-100%
2
Preset programs
000–005 No function
006–017 Automatic / sound program 1
018–030 Automatic / sound program 2
031–042 Automatic / sound program 3
043–056 Automatic / sound program 4
057–069 Automatic / sound program 5
070–082 Automatic / sound program 6
083–095 Automatic / sound program 7
096–108 Automatic / sound program 8
109–121 Automatic / sound program 9
122–134 Automatic / sound program 10
135–147 Automatic / sound program 11
148–160 Automatic / sound program 12
161–173 Automatic / sound program 13
174–186 Automatic / sound program 14
187–199 Automatic / sound program 15
200–212 Automatic / sound program 16
213–225 Automatic / sound program 17
226–238 Automatic / sound program 18
239–251 Automatic / sound program 19
252–255 Automatic / sound program 20
3
Automatic mode/
Sound control
000–100 Automatic program with color switch
101–200 Automatic program with color fade
201–225 Sound program with color switch
226–255 Sound program with color fade