00126630, Version 1.0
29/40
System settings
SYS
DISP
on
Display deactivation after 30 seconds
(default setting)
oFF
Display always on
DISR
on
Display reversed
oFF
Display normal (default setting)
IR
on
IR remote control activated (default setting)
oFF
IR remote control deactivated
FAIL
HOLD
Most recent DMX value is held
BLAC
LEDs are switched off (default setting)
SOUN
LAST
Most recent light effect is held
oFF
LEDs are switched off (default setting)
FOOT
on
Foot switch activated (default setting)
oFF
Foot switch deactivated
REVE
on
Sequence inverted: PAR4, PAR3, PAR2, PAR1
oFF
Sequence inverted: PAR1, PAR2, PAR3, PAR4
REST
YES
Reset to factory settings
NO
No reset to factory settings
Notes:
•
In DMX or slave mode, the display flashes in case of missing signal.
•
After approx. 15 seconds of inactivity, the display returns to the main menu.
Stand-alone mode
Automatic mode
In automatic mode, 20 different show programs are available that run at an adjustable speed.
1
Press the
MENU
button so many times until
AUT
for automatic mode is indicated in the display. Confirm
with the
ENTER
button.
2
Use
UP
and
DOWN
to select the number of the desired program. Confirm with
ENTER
.
3
The display indicates
SWIT/FADE
. Use
UP
and
DOWN
to set a color switch or color fade effect. Confirm
with
ENTER
.
4
The display indicates menu item brightness. Use
UP
and
DOWN
to adjust the brightness of the program
from
d.01
(dark) to
d.100
(bright). Confirm with
ENTER
. The display indicates menu item running speed.
5
Use
UP
and
DOWN
to adjust the running speed of the program from
S.01
(slow) to
S.100
(fast). Confirm
with
ENTER
.
Sound control
Via the integrated microphone the unit can perfectly reproduce the 20 show programs to the rhythm of the
music (sufficient bass provided).
1
Press the
MENU
button so many times until
SOU
for sound control is indicated in the display. Confirm
with the
ENTER
button.
2
Use
UP
and
DOWN
to select the number of the desired program. Confirm with
ENTER
.
3
The display indicates
SWIT/FADE
. Use
UP
and
DOWN
to set a color switch or color fade effect. Confirm
with
ENTER
.
4
Use the rotary control
SENSITIVITY
to adjust the microphone sensitivity to the sound volume. In case of
missing sound signal, the LEDs are either switched off after 5 seconds or hold the most recent light
effect. This function can be found under the menu item
SYS > SOUN
.
Summary of Contents for 42109860
Page 39: ...00126630 Version 1 0 39 40 ...
