background image

 

00094546, Version 1.0 

24/37

Regarding Rechargeable batteries and Batteries 

The  given  battery  run  time  depends  largely  on  the  operating  mode  and  ambient  temperature.  Low 
temperatures  will  reduce  the  run  time  considerably.  Before  using  the  device  for  the  first  time,  completely 
charge the battery. 
 
Rechargeable  batteries/batteries  are  hazardous  waste  which  needs  to  be  disposed  of  appropriately.  If  the 
device  is  to  be  disposed,  the  batteries  have  to  be  removed  first.  Take  it  to  a  local  recycling  plant  for  a 
disposal  which  is  not  harmful  to  the  environment.  Do  not  dispose  of  rechargeable  batteries/batteries  into 
household waste! 
 
Make sure that  the poles are correct  when inserting the  battery. Never  let batteries  lying around openly as 
there  is  the  danger  that  these  can  be  swallowed  by  children  or  domestic  animals.  Immediately  consult  a 
doctor  when batteries are  swallowed! Leaking  or damaged batteries can cause irritations  when getting  into 
contact with the skin. In this case use appropriate protective gloves. Make sure that the batteries cannot be 
short-circuited, thrown into the fire and be charged. There is a danger of explosion. 
 
The contained lithium-ion battery is subject to the Dangerous Goods Legislation requirements. The user can 
transport the battery by road without further requirements. When being transported by third parties (e.g.: air 
transport  or  forwarding  agency),  special  requirements  on  packaging  and  labelling  must  be  observed.  For 
preparation  of  the  item  being  shipped,  consulting  an  expert  for  hazardous  material  is  required.  Dispatch 
battery  only  when  the  housing  is  undamaged.  Tape  or  mask  off  open  contacts  and  pack  up  the  battery  in 
such  a  manner  that  it  cannot  move  around  in  the  packaging.  Please  also  observe  possibly  more  detailed 
national regulations. 
 

OPERATING DETERMINATIONS 

This  device  is  a  lighting  effect  for  creating  decorative  effects.  It  is  designed  for  professional  use,  e.g.  on 
stage,  in  discotheques  or  theaters.  Thanks  to  the  integrated  rechargeable  battery  it  is  ideally  suited  for 
mobile applications. 
 
The  device  can  be  operated  with  100-240  V,  50/60  Hz  mains  voltage  or  via  the  integrated  lithium  ion 
rechargeable  battery  (11.1  V,  11100  mAh)  which  can  be  recharged  when  connecting  the  device  to  the 
mains. The IR remote control operates with a CR2025 button cell. The device was designed for indoor use 
only. 
 
The integrated wireless receiver for WDMX operates in the 2.4 GHz ISM range and is license-free and 
generally approved for operation in EU and EFTA countries. 
 
Lighting effects are not designed for permanent operation. Consistent operation breaks will ensure that the 
device will serve you for a long time without defects. 
 
Do not shake the device. Avoid brute force when installing or operating the device. 
 
When  choosing  the  installation-spot,  please  make  sure  that  the  device  is  not  exposed  to  extreme  heat, 
moisture  or  dust.  There  should  not  be  any  cables  lying  around.  You  endanger  your  own  and  the  safety  of 
others! 
 
This device must never be operated or stockpiled in surroundings where splash water, rain, moisture or fog 
may harm the device. Moisture or very high humidity can reduce the insulation and lead to mortal electrical 
shocks. When  using  smoke  machines, make  sure  that  the  device  is  never  exposed  to  the  direct  smoke  jet 
and  is  installed  in  a  distance  of  0.5  meters  between  smoke  machine  and  device.  The  room  must  only  be 
saturated with an amount of smoke that the visibility will always be more than 10 meters. 
 
The  ambient  temperature  must  always  be  between  -5°  C  and  +45°  C.  Keep  away  from  direct  insulation 
(particularly in cars) and heaters. 
 
The relative humidity must not exceed 50 % with an ambient temperature of 45° C. 
 
This device must only be operated in an altitude between -20 and 2000 m over NN. 
 

Summary of Contents for 41700560






































Reviews: