00137990.DOCX, Version 1.0
30/36
Dimmer
Menu point
diMM
allows the adjustment of the total brightness for all stand-alone operating modes: Stat,
Auto, Soun, Colo.
3 Press the
MENU
button so many times until
diMM
is indicated in the display. Confirm with the
ENTER
button.
4 Use the buttons
UP
and
DOWN
to adjust the desired brightness (
dI 1
= dark,
dI 9
= bright). Confirm with
the
ENTER
button.
Strobe effect
The mode
FLAS
activates the strobe effect. The desired flash rate can be set.
1
Press the
MENU
button so many times until
FLAS
is indicated in the display Confirm with the
ENTER
2 Use the buttons
UP
and
DOWN
to adjust the desired speed (
0 - 9
). Confirm with the
ENTER
button.
Behavior at missing DMX-signal
In
DMX lost
mode the program offers different options when no DMX signal is received.
1
Press the
MENU
button repeatedly until the display shows the
DMX lost
menu. Press
ENTER
to
confirm.
2
Select the desired program with the
UP
and
DOWN
buttons (see
Menu structure
). Confirm with
ENTER
.
Interconnecting several devices (master/slave operation)
Several devices may be interconnected (max. 32). Then all slave units can be synchronized and controlled
with the master unit without the need for a DMX controller. The devices must be set to the corresponding
operating modes.
1 Configure all slave units before connecting the master unit: Press the
MENU
button so many times until
SLAU
is indicated on the display. Confirm with the
ENTER
button.
2 Connect the DMX output of the master unit to the DMX input of the first slave unit. Then connect the
DMX output of the first slave unit to the DMX input of the second slave unit, etc. until all units have been
connected in a chain. Make sure the master unit is the first in the chain. Do not connect a DMX controller
to the DMX input of the master unit.
3 Set the master unit to the desired operating mode. The interconnected devices will now operate
synchronously.
Energy-saving mode
This mode offers the possibility to adjust the battery life.
For example:
Extra bright operating mode: 3 hours
Normal operating mode: 6 hours
Energy saving mode: 8 hours
1 Press the
MENU
button so many times until
batt
is indicated in the display. Confirm with the
ENTER
button.
2 Use the buttons
UP
and
DOWN
to choose the desired setting (
SuPE, norM, Econ
) and confirm with the
ENTER
button.
Potentiometer
This mode activates the rotary dials to manually set the color temperature and brightness.
1
Press the
MENU
button so many times until
PotE
is indicated in the display. Confirm with the
ENTER
button.
2
Use the buttons
UP
and
DOWN
to select
ON
(manual setting activated) or
OFF
(manual setting
deactivated). Confirm with the
ENTER
button.
Summary of Contents for 40001845
Page 1: ......
