EuroLite 40001845, User Manual

Page: 28 / 36

00137990.DOCX, Version 1.0 28/36
OPERATION
Turn on the device. The display indicates the last operating mode. The operating modes can be selected by
means of the display and the control buttons. All settings remain stored even if the device is disconnected
from the mains. The device can be operated in stand-alone mode via the control board or in DMX-controlled
mode via any commercial DMX controller and via QuickDMX with the optionally available EUROLITE
QuickDMX USB Wireless Transmitter/Receiver.
The device is additionally equipped with two rotary dials. The use of these rotary dials is possible as long as
there is no DMX signal at the DMX input.
Menu structure
Press the MENU button so many times until the desired function is indicated on the display. Use the ENTER
button to select the function. With the buttons UP and DOWN you can select the mode or change values.
Confirm with ENTER .
Mode
Display
Function
DMX mode Addr
6CH d001-507 6-channel mode and start address
4CH d001-509 4-channel mode and start address
2CH
d001-511 2-channel mode and start address
White color presets Stat S 01 – S 03
Constant lighting in one of 3 preset
colors
Automatic mode Auto Au01 – Au03 Automatic programs
Sound control Soun So01 – So03 Sound-controlled programs
Running speed in
automatic and sound-
controlled mode
SPEE SP1 – SP9 Program running speed slow > fast
Microphone sensitivity
for sound control
SEnS SE1 – SE9 Microphone sensitivity low > high
White color setting Colo
U000 - U255 Warm white 0-100%
C000 - C255 Cold white 0-100%
Color temperature Temp 2800K-6500K
Color temperature setting
*
Dimmer diMM dI1 - dI9
Total brightness (Stat, Auto, Soun and
Colo modes) dark > bright
Strobe FLAS 0 - 9
Strobe effect slow > fast
Sound control
„silent scene“
SILE
on LEDs off if there is no music signal
oFF LEDs remain on if there is no music signal
Behaviour in case of
missing DMX signal
LoSt
bLac LEDs go off
HoLd Spot holds the last received signal
FuLL All LEDs 100% on
Stat Pre-selected static color 01-03
Auto Pre-selected auto program 01-03
Slave mode SLAV SLAU Slave mode
Energy saving mode batt
SuPE Extra bright operating mode
norM Normal operating mode
Econ Energy saving mode
Potentiometer PotE
on Function for rotary dials activated
oFF Function for rotary dials deactivated
PWM frequency setting rEFr
0.9, 1.5, 2.5, 4, 5, 6, 10,
15, 20, 25kHz
PWM frequency
(pulse-width modulation)
Firmware version Vx.x Vx.x Current software version
*
= See Color temperature settings in 6-Channel-mode CH 6