00137990.DOCX, Version 1.0
29/36
Stand-alone mode
Preset colors
In the
Stat
mode the device will constantly emit one of 3 preset white colors.
1
Press the
MENU
button so many times until
Stat
is indicated in the display. Confirm with the
ENTER
button.
2
Use the buttons
UP
and
DOWN
to set the desired color (
S01~S03
). Confirm with the
ENTER
button.
Automatic mode
In automatic mode, 3 show programs are available that run at an adjustable speed.
1 Press the
MENU
button so many times until
Auto
is indicated in the display. Confirm with the
ENTER
button. Use the buttons
UP
and
DOWN
to select the desired show program (
Au01~Au03
). Confirm with
the
ENTER
button.
2 Press the
MENU
button so many times until
SPEE
is indicated in the display. Confirm with the
ENTER
button. Use the buttons
UP
and
DOWN
to adjust the running speed of the program from
SP 1
(slow) to
SP 9
(fast). Confirm with the
ENTER
button.
Sound control
Via the integrated microphone the unit can perfectly reproduce the show programs to the rhythm of the
music (sufficient bass provided).
1 Press the
MENU
button so many times until
Soun
is indicated in the display. Confirm with the
ENTER
button. Use the buttons
UP
and
DOWN
to select the desired show program (
So01~So03
). Confirm with
the
ENTER
button.
2 Press the
MENU
button so many times until
SPEE
is indicated in the display. Confirm with the
ENTER
button. Use the buttons
UP
and
DOWN
to adjust the running speed of the program from
SP 1
(slow) to
SP 9
(fast). Confirm with the
ENTER
button.
3 Press the
MENU
button so many times until
SEnS
is indicated in the display. Confirm with the
ENTER
button. Use the buttons
UP
and
DOWN
to Adjust the microphone sensitivity to the volume of the music
(
SE 1
= low,
SE 9
= high).
4 If you enable the silent scene mode (
on
setting) in menu item
SILE
,
the LEDs will switch off if the volume
is too low or if there is no sufficient bass beat. If you disable this mode (
off
setting) the LEDs remain on
during periods without music.
White color setting
In the color mode
Colo
the warm white and cold white LEDs can be individually adjusted for intensity. The
device will constantly emit the set color.
1
Press the
MENU
so many times until
Colo
is indicated in the display. Confirm with the
ENTER
button.
2
Now the display indicates the letter
W
for the warm white color and the corresponding intensity value.
Use the buttons
UP
and
DOWN
to adjust the desired value.
3
Confirm with the
ENTER
button. Now the cold white color can be adjusted.
Color Temperature
In the color mode
Temp
the desired color temperature of the LEDs can be set. The device will constantly
emit the set color temperature.
1 Press the
MENU
button so many times until
Temp
is indicated in the display. Confirm with the
ENTER
button.
2 Use the buttons
UP
and
DOWN
to set the desired color temperature (
2800K-6500K
). Confirm with the
ENTER
button.
Summary of Contents for 40001845
Page 1: ......
