manualshive.com logo in svg

Euroheat EVO AQUA 15, Operating Instructions Manual, Page: 15 / 20

Share
Download
Euroheat EVO AQUA 15 Operating Instructions Manual Download Page 15

© EUROHEAT DISTRIBUTORS (H.B.S) LTD. July 2011

    

 Instructions Part Number IN1232 Ed 1

15

Displays

This provides an overview of operating statuses and fault messages.

Operating Statuses:

The following displays provide information on the appliance’s current operating status. No action is required 
on your part.

OFF
XXºC

Switched off by pressing the             button.
Appliance does not restart automatically.

OFF-E
XXºC

Switched off via external requirement.
Appliance on standby and can be restarted via the external requirement.

OFF-B
XXºC

Switched off via buffer sensor.
Buffer full, appliance restarts automatically.

OFF-W
XXºC

Switched off due to overheating. After cooling down, appliance restarts automatically.

OFF-S
XXºC

Switched off by pellet suction conveying process. Appliance restarts automatically after suction 
conveying process.

STOP
XXºC

Burnout phase

STOP-C
XXºC

Burnout phase, cooling phase

START
XXºC

Appliance starting up, ignition phase

H_43
XXºC

Heating-up phase (identified by “-“, appliance slowly moves up through the output stages

H_80
XXºC

Operating phase: displays the current output stage (for example 80%)

CL-MIN

Minor cleaning (after one hour)

CL-MAJ

Major cleaning (after five hours)

XX = curret boiler temperature

Summary of Contents for EVO AQUA 15





















Reviews:

No comments