©
EUROHEAT
DISTRIBUTORS (H.B.S) LTD. Aug 2006
Instructions Part number IN1016 Ed G
14
Mertik Maxitrol GV34 Gas Valve
Removing Gas valve Cover Plate
Pilot gas and pressure regulator adjustment screws are located under the cover. To remove the
cover, first loosen the screw next to the temperature knob.
Insert the tip of a small screwdriver into the slot on the side of the front cover next to the on/off knob,
push outwards and lift the cover off.
�
�
Pilot flame
adjustment screw
(preset at factory)
Operating pressure
adjustment screw
(The direction is indicated on
the brass cover of the
adjustment screw)
Insert a small
screwdriver
into slot, lift
outwards and
lift cover off
On/Off
Pilot Setting and
Ignition Control
Manual Control
Front cover screw
Low pressure adjusting screw
(The flat blade screw can be accessed through a
hole in the bottom plate of the stove under the valve,
anti clockwise to increase, clockwise to decrease.)
