Cleaning
14
Quick installation guide_Conveyor system EURO-flex Al_20221111_EN.docx
4
Cleaning
This chapter provides information on the execution of the operating mode Cleaning:
▪
Personnel and Protective equipment (Page 14)
▪
Selection of the cleaning agent (Page 14)
▪
Preparation (Page 15)
▪
ATTENTION
Warning of material damage due to improper cleaning!
Improper cleaning leads to damage to the system or its surroundings.
»
Cleaning the system according to the instructions in this installation guide.
»
Do not use steam jet or high-pressure cleaning devices for cleaning surfaces.
»
Do not use compressed air for cleaning and drying surfaces.
4.1
Personnel and Protective equipment
Personnel and Protective equipment
Specification
Designation
Personnel
Operating personnel
Personal protective equipment
Protective equipment against the cleaning agents used
according to the instructions of the manufacturer of the
cleaning agents
4.2
Selection of the cleaning agent
The cleaning agents used are specified by the local hygiene officer.
Observe the cleaning agent manufacturer's instructions.
Furthermore, observe the following:
Find application:
▪
Solutions with a pH value between 4.5 and 9
▪
Water under low pressure
▪
Water with temperatures below 40°C
Find no application:
▪
Cleaning products containing chlorine, ammoniac, phosphoric acid or their compounds
▪
Abrasive cleaning products
▪
Solutions with a pH value below 4.5 or above 9
▪
Water under high pressure
▪
Water with temperatures above 40°C
