Euroflex EURO-flex, Quick Installation Manual, Page: 18 / 23

18 Maintenance
Quick installation guide_Conveyor system EURO-flex Al_20221111_EN.docx
Conveyor system
Assembly and maintenance work Interval [Bh] Personnel
Remove foreign bodies 8 (per shift) Operating personnel
Clean conveyor system surface 8 (per shift) Operating personnel
Check gear unit for leakage 8 (per shift) Maintenance personnel
Inspect surface for damage 170 Maintenance personnel
Conveyor chain check for damage and elongation 50 250 500 Maintenance personnel
thereafter every 500
replace 4.000
check for wear 1.000 (quarterly) Maintenance personnel
Slide rails check for damage and wear 50 250 500 Maintenance personnel
thereafter every 500
replace Replace if required
check all connections
Check bending wheel for damage and wear 500 Maintenance personnel
Check sliding bend for damage and wear 500 Maintenance personnel
Check roller transition/End module for damage and wear 500 Maintenance personnel
Flange bearing: Check eccentric ring for secure seating 170 Maintenance personnel
Check motor plate for secure seating 500 Maintenance personnel
Check bearing and links for correct function 1.000 (quarterly) Maintenance personnel
Check toothed wheel for damage and wear 50 250 500 Maintenance personnel
thereafter every 500
Drive/Deflection unit
Assembly and maintenance work Interval [Bh] Personnel
Guides of the
conveyor chain
(KU side parts) check for damage and wear 1.000 (quarterly) Maintenance personnel
replace 7.000
Sprocket wheel check for damage and wear 1.000 (quarterly) Maintenance personnel
replace 7.000
Ball bearing replace 7.000 Maintenance personnel
Sheet metal flange
bearing
replace 7.000 Maintenance personnel
Roller chain at the
drive station
check for damage and elongation
50 250 500 Maintenance personnel
thereafter every 500
Sprocket wheel on
roller chain check for damage and wear e 1.000 (quarterly) Maintenance personnel
replace Replace if required