manualshive.com logo in svg

EUROCOM Sky MX5, User Manual

Share
Download
EUROCOM Sky MX5 User Manual Download Page 4

II

Preface

R&TTE Directive

This device is in compliance with the essential requirements and other relevant provisions of the R&TTE Direc-
tive 1999/5/EC.

This device will be sold in the following EEA countries: Austria, Italy, Belgium, Liechtenstein, Denmark, Lux-
embourg, Finland, Netherlands, France, Norway, Germany, Portugal, Greece, Spain, Iceland, Sweden, Ireland,
United Kingdom, Cyprus, Czech Republic, Estonia, Hungary, Latvia, Lithuania, Malta, Slovakia, Poland, Slov-
enia.

ErP Off Mode Power Consumption Statement:

The figures below note the power consumption of this computer in compliance with European Commission (EC)
regulations on power consumption in off mode:

•

Off Mode 

< 0.5W

Summary of Contents for Sky MX5







































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands