manualshive.com logo in svg

EUROCOM Sky MX5, User Manual

Share
Download
EUROCOM Sky MX5 User Manual Download Page 191

Modules

Intel® Rapid Storage Technology 6 - 47

6

Intel

®

 Rapid Storage Technology

The 

Intel Rapid Storage Technology application

 provides high-performance

SATA and SATA RAID capabilities. Install the 

Intel Rapid Storage Technology

application

 (after installing all necessary drivers in the correct order) to support

your 

RAID

 system or SATA drive if set up in 

AHCI mode

 in the BIOS (see 

“SATA

Mode (Advanced Menu)” on page 5 - 12

).

IRST Driver Installation

1.

Insert the 

Device Drivers & Uti User’s Manual 

disc into an attached 

DVD drive.

2. Click 

Option Drivers

 (button).

3. Click 

5.Install IRST Driver

 

> Yes

.

4. Click 

Next

.

5. Click the check box to accept the license and click 

Next

.

6. Click 

Next

 

> Next > Next

.

7. Click 

Finish

 to restart the computer.

See the following pages for more information if you have set your hard disks up in
a RAID configuration.

IRST and M.2 PCI-e 

SSDs

Note that Intel® Rapid
Storage Technology

does not support M.2
SSDs with a

 

PCI-e In-

terface

 (M.2 SSDs with

a SATA Interface are
supported).

Summary of Contents for Sky MX5







































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands