EUROCOM Notebook V09.2.00, User Manual

Page: 146 / 266

Modules & Options
7 - 38 3.75G/HSPA Module
7
HSPA Modem Interface
The connection information is stored on the USIM card supplied by the service pro-
vider.
1. Power on the 3.75G/HSPA module using the Fn + key combination.
2. Access the HSPA Modem Interface from the Start menu ( Start > Programs/All
Programs > HSPA Modem > HSPA Modem ), or by double-clicking the desktop
icon .
3. If a USIM card is not installed then a message will appear to notify you of this (click
OK to close the message and install the USIM card).
4. If you are required to enter a pin # then a message will appear to prompt you to
enter a pin #. (
Note : to change pin # go to Settings and click OK in PIN
code .)
5. Click the Network connection button and the HSPA Modem interface
window will display Connection Manager .
HSPA Modem Help
To get help on 3.75G/
HSPA module configu-
ration and settings, click
the help icon
and
select Help .
Figure 7 - 32
HSPA Modem
Interface Window
Connection Manager
The connection information is commonly stored on the USIM
card supplied by the service provider. However if your ser-
vice provider requires details such as
IP Address , User-
name and Password etc. to be entered before connection
you can enter them in the Connection Manager tab, or
save the details in Profiles .