manualshive.com logo in svg

EUROCOM Notebook V09.2.00, User Manual

Share
Download
EUROCOM Notebook V09.2.00 User Manual Download Page 106

Upgrading The Computer

6 - 10 Upgrading the System Memory (RAM)

6

3.

Carefully (

a fan and cable are attached to the under side of the cover

) lift up 

the bay cover.

4.

Carefully disconnect the fan cable 

, and remove the cover 

.

Fan Cable & Cover

Make sure you recon-
nect the fan cable 
before screwing down
the bay cover. Note the
information on replacing
the RAM & CPU bay
cover in 

“Cover Pins”

on page 6 - 12

.

Contact Warning

Be careful not to touch
the metal pins on the
RAM module’s connect-
ing edge. Even the
cleanest hands have
oils which can attract
particles, and degrade
the module’s perfor-
mance.

Figure 6 - 8

CPU/RAM Bay 

Cover Removed

4

4

5

5

4

5

4

Model B

Model A

Summary of Contents for Notebook V09.2.00











































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands