EUROCOM D220S, Service Manual, Page: 32 / 113

Disassembly
Removing the System Memory 2 - 7
2.Disassembly
Removing the System Memory
1. Turn the computer OFF , remove the battery ( page 2 - 6 ).
2. Remove screw from the RAM cover ( Figure 2 - 2a ), and lift the cover up off the computer.
3. Locate the memory sockets & ( Figure 2 - 2 b ), and gently pull the latches & on the memory socket
toward the sides of the computer as indicated.
4. The module ( Figure 2 - 2c ) will pop-up, and you can remove it.
5. Insert a new module holding it at about a 30° angle and fit the connectors firmly into the memory slot.
Figure 2 - 2
Memory Removal
Sequence
a. Remove the screw,
then remove the
RAM cover.
b. Pull the latch(es) on
the memory sockets
to release the mod-
ule(s).
c. When the module
pops up, lift it out.
2. RAM cover
7. Memory module(s)
• 1 Screw
Contact Warning
Be careful not to touch
the metal pins on the
module’s connecting
edge. Even the clean-
est hands have oils
which can attract parti-
cles, and degrade the
module’s perform-
ance.
1 2
3 4 5 6
7
3
a.
2
1
b.
4
6
7
c.
5
6 5