Upgrading The Computer
6 - 8 Upgrading The System Memory
6
5.
If there is a module currently installed which needs to be
upgraded/replaced then remove it.
6.
Gently pull the two release latches ("
1
"
&
"
2
"
in
Figure 6 - 4
) on
the sides of the memory socket toward the front and rear of the
computer, as indicated in
Figure 6 - 4
.
Figure 6 - 4
Removing/Installing a
RAM Module
7.
The module "
3
" will pop-up, and you can remove it.
8.
Insert a new module holding it at about a 30° angle and fit the
connectors firmly into the memory slot.
Contact Warning
Be careful not to touch
the metal pins on the
module’s connecting
edge Even the clean-
est hands have oils
which can attract parti-
cles, and degrade the
module’s perform-
ance.
1
2
3
