47
The reception symbol (N) has the following meanings:
—
The reception symbol flashes when the basis station is looking for the DCF signal.
—
When the reception symbol is permanently displayed, the last reception attempt
of the DCF signal was without problems.
—
When the reception symbol is missing in the display, either the last reception
attempt failed or the time was set manually.
(
If the DCF signal cannot be received where the basis station is set up, set
the time and date manually; see chapter 12.
b) Perform Manual DCF Reception Attempt
Keep the button “-” (4) pressed for 3 seconds.
The basis station then emits a sound signal and the symbol for DCF reception “ ”
(N) starts to flash.
(
Do not move the basis station during reception; this takes about 5 minutes.
Do not push any key.
If no current time is displayed after 5 minutes either, you may either start a
new search or set the time manually; see chapter 12.
