Euroboor TUBE.30, Operator'S Manual

Page: 17 / 31

17
4.4 Tool lubrication
Horizontal applications
In order to use the lubrication system, the tank must be filled with a cutting fluid or oil:
1. Make sure the flow regulator is closed
2. Unscrew the cap
3. Fill the container with cutting fluid or oil
4. Screw the cap back on
•
Adjust the fluid flow as required using the flow regulator;
•
Add more cutting fluid if the shavings (metal chips) become blue.
Vertical and overhead applications
Dip the cutter in cutting paste or apply an appropriate spray.
WARNING: Do not use the lubrication system in vertical or overhead drilling applications. Instead
use EUROBOOR cutting paste or spray.
Make sure to use only suitable cutting oil or fluid. EUROBOOR offers a wide range of cutting lubricants
for all tool and material combinations. Proper cooling will help you create better and faster results, and
extend the lifetime of your tools.