www.euroboor.com
27
5. Maintenance
Your EUROBOOR power tool has been designed to operate over a long period of time with a
minimum of maintenance. Continuous satisfactory operation depends upon proper tool care
and regular cleaning.
CAUTION:
To reduce the risk of injury, turn off and disconnect the machine from the
power source before installing and removing accessories, before adjusting or
changing set- ups or when making repairs.
Just as every power tool with moving parts, your
EUROBOOR EDC.355
also needs regular
maintenance.
VISUALLY CHECK THE MACHINE FOR DAMAGE
Machine must be checked before operation for any signs of damage that will affect the
operation of the machine. Particular notice must be taken of the mains cable, switches and
mo
ving parts. If the machine appears to be damaged it should not be used. Failure to do so
may cause injury or death.
CLEANING
-
Clean all dirt, dust, metal chips and burrs from the machine regularly.
The use of
compressed air is advised. Never remove metal chips with bare hands!
-
Blow dirt and dust out of the motor housing with compressed air as often as dirt is
seen collecting in and around the air vents. Wear approved eye protection and an
approved dust mask.
-
Never use solvents or other harsh chemicals for cleaning the non-metallic parts of the
tool. These chemicals may weaken the materials used in these parts. Use a cloth
dampened only with water and mild soap. Never let any liquid get inside the tool; never
immerse any part of the tool into a liquid.
