16
4.3 Gearbox
1.
To select the correct gear from neutral (horizontal) position:
a.
Rotate the switch counterclockwise to position
o
, this is gear 1
b.
Rotate the switch clockwise to position
oo
, this is gear 2
2.
A gear is only correctly selected when the gearbox switch is aligned with the indicators on
the gearbox.
In case you have trouble fully and correctly selecting a gear, the gears in the gearbox
might be misaligned. Slightly rotating the output shaft by hand will help you align the
gears and correctly and fully selecting the intended gear.
NOTE: never touch moving machine parts!
3.
Speed selection for annular cutters (also see plate on gearbox):
o
Ø 27-50 mm
Rotating speed 380
min-1
oo
Ø 12-26 mm
Rotating speed 690
min-1
[image 2-5]
WARNING:
never touch moving machine parts!
0800 536 774
www.globalweldingsupplies.com
13 Patiki Road Avondale, Auckland 1026
