Euroboor ECO.36+, User Manual

Page: 21 / 39

21
4.2 Control panel
The control panel on your magnetic drilling machine is designed for maximum ease of use and safety.
1. Magnet switch
2. Motor switch
3. Power cable
4.3 2-Way electromagnet
Make sure the magnetic drilling machine is placed on a smooth, clean, level and solid surface without
any objects or debris to guarantee maximum adhesion.
The workpiece must at least be 6 mm (1/4") thick for the magnet to stick and to drill safely. In case
the workpiece is between 3 mm (1/8") and 6 mm (1/4") make sure to make a proper base to create a
good magnetic field as shown below.
[image 4-3]
The electromagnet will work best on surfaces of at least 10 mm (3/8") thickness.
[image 4-2]