www.euroboor.com
10
Safety warnings
1.
Do not
operate your band saw machine until it is completely assembled and installed
according to the instruction.
2.
Do not
operate your band saw machine when bolts, screws and clamps are missing or
not fully tightened.
3.
Do not
operate the machine if you are not familiar with the operation of a band saw
machine. Please obtain advice from a qualified person
.
4.
Do not
use the machine in area’s with flammable liquids or gasses.
5.
Do not
use the machine in damp area’s or when it is exposed to rain.
6.
Do not
use the machine if the saw band cannot run freely or vibrates heavily.
7.
Do not
reach behind or over the cutting tool when it is connected to the power source.
8.
Do not
reach your hands in or near the path of the saw band.
9.
Do not
cut any objects that are not clamped, using the clamp of the band saw machine.
10.
Do not
make any adjustments to the machine, removing or securing the workpiece,
when the saw band has not come to a full stop.
11.
Do not
use a saw band with different measurements than the machine’s requirements.
12.
Do not
remove any guards from the machine, as they contribute to the safety level of
the machine.
13.
Do not
allow the saw band to chatter and jump as this may cause increased wear on
the saw band, resulting in poor cutting and possible broken saw band teeth.
