www.euroboor.com
17
3. Preparation & adjustment
3.1 Assembly
The EUROBOOR EBS.500 band saw machine comes without the distance set bracket and
machine feet fitted. Fitting these to the machine is necessary before operating the machine.
Please refer to below for fitting instructions. Further to this it is advised to check the machine
is complete and all standard accessories are included before proceeding in any way.
WARNING:
Before undertaking any type of preparation or adjustment, make sure
the machine is switched off and the power supply is disconnected.
3.1.1 Fitting the machine feet
The machine is not fitted with the machine
feet, when it arrives. These are included in the
box with the machine. For gaining stability of
the machine EUROBOOR strongly advises to fit
the machine feet to the machine, before
operation. Fitting the machine feet can be
done by:
1.
Collect the 4 machine feet from the box. (Image 3-1)
2.
Tilt up the machine on one side, and put a machine feet on each corner. (Image 3-2)
3.
Now tilt up the opposite side of the machine, and put on the remaining two machine
feet.
Image 3-1
Image 3-2
