www.euroboor.com
25
4.7 Adjusting the depth of cut
The maximum depth of cut can be adjusted by
turning
the
depth
adjustment
screw
(counter-) clockwise. Setting a correct depth of
cut prevents the machine from touching the base,
but also can be used to stop cutting at a certain
depth. Please refer to image 4-6.
4.8 Transportation
For transporting the tool please follow the steps below:
1.
Pull down the machine’s arm.
2.
Put on the arm lock pin. The arm is now locked in its lowest position.
3.
Now the machine can be carried. Carry the machine on a central point of the arm, to
keep it stable.
Image 4-6
Image 4-7
