www.euroboor.com
23
Cleaning
-
Clean all dirt, dust and metal of your beveling machine;
-
Blow dirt and dust out all air passages with dry air as often as dirt is seen collecting in and
around the air vents. Wear approved eye protection and an approved dust mask;
-
Never use solvents or other harsh chemicals for cleaning the non-metallic parts of the tool.
These chemicals may weaken the materials used in these parts. Use a cloth dampened only with
water and mild soap. Never let any liquid get inside the tool; never immerse any part of the tool
into a liquid.
Check machine grease
The gearbox grease should be checked and replaced at least once a year, or every 100 hours of
operation, to ensure maximum lubrication and cooling, and thus the best performance of the machine.
