www.euroboor.com
22
5. Maintenance
Your EUROBOOR beveling machine has been designed to operate over a long period of time.
Continuous satisfactory operation depends upon proper tool care and regular cleaning.
CAUTION:
To reduce the risk of injury, turn the machine off and disconnect machine from
power source before installing and removing accessories, before adjusting or changing set-
ups or when making repairs. Be sure the switch is in the OFF position. An accidental start-
up can cause injury.
Just as every beveling machine with moving parts, your EUROBOOR beveling machine also needs
regular maintenance service. A few recommendations follow :
Visually check the machine for damage
The machine must be checked before operating for any signs of damage that will affect the operation
of the machine. Particular notice must be taken of the main cable, if the machine appears to be
damaged it should not be used. Failure to do so may cause injury or death.
Worn bearings in the milling head and blunt cutting plates are the main cause for uneven finishes and
rough and long operation. Replace worn components in good time to reduce stress on the machine
and increase its longevity.
Only use original EUROBOOR parts, accessories and consumables. Have maintenance carried out by an
EUROBOOR specialist.
