www.euroboor.com
18
3.2 Prior to use
Check the machine for possible damage; Before using the machine, carefully check the protective
components or slightly damaged components to ensure they are operating perfectly and as intended.
Check that moving parts are in perfect working order, do not jam and check whether the parts are
damaged. All parts must be correctly installed and fulfill all conditions necessary to ensure perfect
operation of the machine.
Damaged protective components must be repaired or replaced according to specifications by
EUROBOOR or any authorized EUROBOOR dealer.
DO NOT
use under wet conditions or in presence of flammable liquids or gases.
DO NOT
let children come into contact with the machine. Supervision is required when inexperienced
operators use this machine.
WARNING:
•
Make sure the machine is always in a stable position before and during use.
•
Do not operate the machine above your head.
•
Never touch the milling head while the machine is running.
•
Always operate the machine away from your body.
•
Work is performed with two-hand operation for all machine positions. When operation the
machine ensure that the machine is held with both hands in such a way that both hands are
kept away from the processing point. Make sure the auxiliary front handle is positioned
correctly.
•
Do not use this tool continuously for a period over 30 minutes.
Electrical safety
Always check that the power supply corresponds to the voltage on the rating plate. If the supply cord
is damaged, it must be replaced by a specially prepared cord available at EUROBOOR or your
EUROBOOR dealer.
