www.euroboor.com
17
Setting bevel depth
1.
Loosen the clamping ring lever.
2.
Rotate the entire support deck assembly, use the dial ring as indication for the depth
adjustment. Each complete rotation corresponds to a bevel depth of 1.5 mm (1/16"), this is
indicated on the scale.
The bevel depth (in mm) is calculated as follows, with example
:
[value on scale]
+
[value on dial ring]
=
bevel depth
1.5
+
0.7
=
2.2 mm
3.
Tighten the clamping ring lever.
[image 2-2]
