manualshive.com logo in svg

EURO EG80F, Installation And Regulation

Share
Download
EURO EG80F Installation And Regulation Download Page 14

14

461307208 (RS-002)

H

Q

15

14

CLEANING AND MAINTENANCE

•  Prior to any maintenance work or cleaning, disconnect the appliance from the electricity mains.

•  Do not use a steam cleaner to clean a hob, oven or range.

•  Do not wash the parts if they are still hot.

•  Do not use metal pads, abrasive powders or corrosive spray products for cleaning

•  Do not leave vinegar, coffee, milk, salty water or the juice of lemon or tomato on enamelled surfaces 

for any length of time.

HOT PLATE

To keep the surface of the hob and the various components in pristine condition (grill, enamelled covers, burner 

heads and fl ame diffusers, it is very important to wash them in warm soapy water, rinse and dry them well after 

each use.

IMPORTANT

Comply with the following instructions, before remounting all parts:

•  Position the burner skirts as indicated in fi g. 14.

•  Verify that the holes of fl ame ring are not obstructed by any residue and that stop notch (H) on the fl ame ring 

itself, has been correctly positioned on lip (Q) (see fi g. 15).

•  Take care not to disturb the ignition spark plugs or eventually fl ame failure devices. 

•  Do not force the taps if they are diffi cult to open. Contact the technical assistance service for repairs.

INSTRUCTIONS FOR THE USER

Summary of Contents for EG80F





























Reviews:

No comments

Brands by name

Popular brands

Load more brands