TS301;351 TS301/45;351/45 - 9 -
SEP. 2007
ENGLISH
SEE PICTURE 12 PAGE 32
Loosen locking handle and lift head so that the required gap is obtained. Re tighten locking handle.
I
f the motor is overloaded as a result of too much pressure or because of unsuitable or worn out blade, the
overload switch will automatically cut off the power.
Wait a few minutes for the motor to cool.
In 230 V Machines (with internal thermal protection overload) : Push the green start button.
In 115 V Machines (with external overload – see picture 13 Page 32) :
Before starting, push in the overload switch and then the green start button.
•
The manufacturer declines all responsibility for loss or damage resulting from misuse or any modification or
alteration that does not conform to the manufacturer’s original specifications.
•
At the workstation, the sound pressure level may exceed 85 db (A).
In this case individual protection measures must be taken.
When ordering spare parts, please mention machine serial no., part no. and description.
DEPTH OF CUT ADJUSTMENT
OVERLOAD
IMPORTANT ADVICE
SPARE PARTS ORDERING