ADDITIONAL IMPORTANT SAFEGUARDS
2
1. Your Shark Cord/Cordless iron is
designed to rest only on the iron rest
provided with the iron. Do not rest
iron on soleplate.
2. Never use or rest iron on an
unstable surface.
3. While the iron is hot, never set iron
on an unprotected surface - even if it
is on its heel rest.
4.
WARNING! TO PREVENT
ELECTRIC SHOCK OR OTHER
INJURY, before filling the iron
with water, make sure that the
plug is removed from the outlet.
5.
CAUTION: Never fill the iron with
fabric conditioner, starches or any
other solution, as these will
damage the steam mechanism. Do
not use contaminated water.
6.
WARNING! TO AVOID FIRE, never
leave iron unattended while it is
plugged in.
7.
WARNING! TO PREVENT
ELECTRIC SHOCK, never
immerse the iron in water or other
liquid.
8.
WARNING! TO PREVENT
ELECTRIC SHOCK, never use the
iron in a location where it can fall
or be pulled into water or any
other liquid. If the iron falls into
water or any other liquid, unplug it
immediately. DO NOT reach into
the water or liquid.
9.
CAUTION: Never use scouring
pads, abrasive or chemical
cleaners, or solvents to clean the
exterior or soleplate of your iron.
Doing so will scratch and/or
damage the surface.
10.
WARNING! DO NOT aim iron at
face, towards yourself, or anyone
else while using or adjusting
steam. Burns or serious injury
may occur.
11. Always store your iron on the iron
rest provided with your iron, not on
the soleplate. If stored face down,
even the smallest amount of
moisture will cause the soleplate to
corrode and stain.
12.
DANGER! Never use the iron if it
is damaged or dropped. Using the
iron when it is damaged could
create the risks of fire, electric
shock, injury or death.
DIRECTIVES
SUR
L’ÉTIQUETTE
TISSU
RÉGLAGE
DE TEMP.
COMMANDE
DE VAPEUR
BOUFFÉE
DE
VAPEUR
ATOMISEUR
V
e
u
ille
z
n
o
te
r q
u
e
s
u
r l
’é
tiq
u
e
tte
s
ig
n
ifi
e
«
C
E
T
A
R
T
IC
L
E
N
E
D
O
IT
P
A
S
Ê
T
R
E
R
E
P
A
S
S
É
!
»
COTON
LIN
FIBRES
SYNTHÉ-
TIQUES, p.
ex. acrylique,
nylon,
polyester
SOIE
LAINE
MIN
•
• • • • •
MAX
0
VAPEUR
MAXIMUM
VAPEUR
MINIMUM
37
TABLEAU DE REPASSAGE
REMARQUE:
avant de commencer le
repassage de tissus délicats, il est bon
de vérifier la température du fer en
repassant un bord ou une couture
intérieure.
Pour choisir la température du
fer, alignez la température choisie
sur le cadran avec l’indicateur
sur le réservoir d’eau.
